Yamaha HS8S 8″ Powered Subwoofer
The HS8S 8″ Powered Subwoofer from Yamaha features an eight-inch cone woofer that is capable of up to 150W of output. It can reproduce frequencies down to 22Hz and features variable low and high cut filters between 80 and 120Hz. You can connect to the HS8S through its stereo XLR or 1/4″ TRS inputs. It also has stereo XLR extension sub outputs.
- Low Resonance Enclosure Design
- HS Series cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit. The enclosures are constructed from a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound
- Noise Reduction Technology
- Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise. By adopting a noise reduction technology that incorporates an analysis of a visual representation of the sound, Yamaha’s engineers are able to control and reduce the vortex. Through this analysis Yamaha has arrived at a port design that reduces noise up to 6dB
- Controls and Connectivity
- The HIGH CUT control sets the cutoff frequency of subwoofer output high-frequency attenuation from 80Hz to 120Hz, while PHASE switch adjusts the phase of the subwoofer output. The LOW CUT switch and LOW CUT controls enables attenuation of low frequencies for output between 80Hz and 120Hz. The HS8S subwoofer is equipped with XLR and TRS phone jack inputs and for outputs XLR for L and R and EXT SUB out
-
System Type Powered Subwoofer Frequency Response 22 to 150 Hz Transducer 1x 8″ (203 mm) Cone Output Power 150W Input Sensitivity -10 dBu Impedance Input: 10 kΩ
Output: 600 ΩInputs 2x Balanced XLR3-31 Type
2x Balanced 1/4″ (6.35 mm) TRSControls Level control
Phase Switch: Normal/Reverse.
High Cut Control: 80 to 120 Hz, center click
Low Cut Control: 80 to 120 Hz, center click
Low Cut Switch: ON/OFFIndicators 1x Power ON, White LED Dimensions (W x H x D) 11.8 x 13.8 x 15.3″
| System Type | Powered Subwoofer |
| Frequency Response | 22 to 150 Hz |
| Transducer | 1x 8″ (203 mm) Cone |
| Output Power | 150W |
| Input Sensitivity | -10 dBu |
| Impedance | Input: 10 kΩ Output: 600 Ω |
| Inputs | 2x Balanced XLR3-31 Type 2x Balanced 1/4″ (6.35 mm) TRS |
| Controls | Level control Phase Switch: Normal/Reverse. High Cut Control: 80 to 120 Hz, center click Low Cut Control: 80 to 120 Hz, center click Low Cut Switch: ON/OFF |
| Indicators | 1x Power ON, White LED |
| Dimensions (W x H x D) | 11.8 x 13.8 x 15.3″ |









UR816D
CB-4
키보드 스탠드 SPL150
CASE-960S
BP-3U
GM5218LK
AS3 듀얼 무선마이크
BLX14R/SHU02-X7
ED-V4H
ENW-100 (SHU/SENN/AKG/MIP/AT)
CK31 (단일지향)
C391B
BGM-200
C451B
CX-508
DXL1K
308P MKII
CP4000S
EPM8
A57AWS (BETA57용 윈드스크린)
C417L
WCB2D 라발리어 마이크로폰
PX3
PX5
마이크스탠드 RSM 200 BK
마이크스탠드 RSM 180 BK
EX-4595 (1조)
RC-6U/250,440,520
CM501
SHARK 15A Ⅰ
MA5000i
A25D 유선홀더
WING COMPACT 케이스
GM5218K
19" 렉케이스 BAGCR202P
CPS 2.6 MK II
EVID S-44 Compact Sound Set
SHARK 15A Ⅱ
CP2200
EVU-1062/95
A56D
ELX200-10
EKX-15P
V-12
EKX-18SP
Control 64PT
C1000S
ALISON-20CH
IF2112/64/95/99
GN30E
DH420






There are no reviews yet.